Applications
Traction Converters
The traction inverter has to convert energy efficiently and power the drive motors of the locomotive. The conversion of energy (from direct current into three-phase alternating current) is made possible only by state-of-the-art power electronics. ELECTROHMS offers closed loop current sensors and hall effect based voltage transducers for these critical traction converter applications.Auxilary Converters
Auxilary converter forms part of the auxiliary drive system in the ac locomotive which is primarily used for supplying power to loads such as fans, blowers, lighting the cabin and also charging the locomotive battery. It typically has a IGBT configuration and is fed from the auxiliary winding of the locomotive transformer. ELECTROHMS has developed current sensors to meet the specifications of the manufacturers.Electronic Rectified Regulated Unit
The ERRU 4.5Kw & 25 kW used in Indian Railway AC, non AC coaches , has input supply of 3-phase AC voltage generated from a brushless alternator. The output of the alternator is an AC variable voltage and variable frequency depending on the speed of the train. The AC voltage is converted to regulated DC voltage as required for AC and non AC coaches. It also charges a battery bank through a voltage and current controller. ELECTROHMS closed loop current sensors are being used by manufacturers of ERRUs for Indian Railways.Featured Product
Closed loop hall effect current sensors are used in measurement of Alternating and Direct Current in electrical and electronic equipments such as SMPS, UPS, AC & DC industrial drives.
Resources
Closed loop hall effect current sensors are used in the measurement of Alternating and Direct Current in electrical and electronic equipments such as SMPS, UPS, AC & DC industrial drives, in process control applications like light control, heater load control, etc.
Resources
VJ500T03 - An integrated primary resistor networks determines the
nominal measuring voltage of the sensor. It has high level of galvanic isolation and are suitable for high voltage measurements.
Resources
An integrated primary resistor networks determines the nominal measuring voltage. The advantages of VHASM1K2T02 is Compact design, Excellent accuracy (offset, sensitivity, linearity), Good response time, Low temperature drift
Resources
VJ1K0T03 - An integrated primary resistor networks determines the
nominal measuring voltage of the sensor. It has high level of galvanic isolation and are suitable for high voltage measurements.
Resources
VJ1K5T03 - An integrated primary resistor networks determines the
nominal measuring voltage of the sensor. It has high level of galvanic isolation and are suitable for high voltage measurements.
Resources
Closed loop hall effect current sensors are used in measurement of Alternating and Direct Current in electrical and electronic equipments such as SMPS, UPS, AC & DC industrial drives, in process control applications like light control, heater load control etc.
Resources
Closed loop hall effect current sensors are used in measurement of Alternating and Direct Current in electrical and electronic equipments such as SMPS, UPS, AC & DC industrial drives.
Resources
Closed loop hall effect current sensors are used in measurement of Alternating and Direct Current in electrical and electronic equipments such as SMPS, UPS, AC & DC industrial drives.
Resources
